Engineering Engineering 519-621-5520 • 800-265-6638 • cambridgebrass.com • [email protected] 11 5/23 Body H Nut Stainless beveled gripper EPDM gasket Conductor Spring for electrical continuity Tubing *Insert stiffeners are required on all flexible plastic connections. NOTE: Materials meet or exceed A.W.W.A. Standard C-800. Copper tube, CTS PE is stabbed through the nut and gasket/friction ring assembly to stab depth. The H or HE nut is tightened to the stop/shoulder on the body, which compresses the EPDM gasket and Stainless-Steel beveled gripper, which creates a water-tight seal and pull-out strength. The electrical conductor spring makes positive contact between the copper tubing and the brass nut/fitting. When using with CTS PE, H or HE, the electrical conductor spring becomes purposeless. Stainless-Steel beveled gripper H, HE nut EPDM gasket AWWA straight threads Stab depth Tubing Electrical conductor spring Shoulder/stop Any H Series connection can be changed to a C903 Connection. Replace the “H” in the model number with a “K.” 3/4" or 1" only. HE Option for Nut For HE feature add “E” to the Available for 3/4", 1", 1 1/4", 1 1/2", & 2. "E" Anode, Thaw Wire, Tracer Wire Option for "H" Nut Aluminum Core Tube NOTE: H, B, GJ, J, K nuts have the same threads and are interchangeable. CB Compression - H, HE GJ Series from Cambridge Brass. is a CTS Compression connection that is available in 3/4”, 1”, 1 1/4”, 1 1/2” and 2” sizes. This connection can be utilized on all Cambridge Brass series end connections by removing the Compression assembly and replacing it with the GJ assembly. The brass nuts are made from C83600 ASTM B584 brass along with NSF 61 rubber gasket and Phosphorus Bronze grip ring. For use with Copper tube, (“K” & “L” Hard or Soft) or CTS PE (ASTM D2737 SDR 9) with appropriate Insert Stiffener. Features: - Large wrench flats for easier installation - Tighten to Shoulder Stop - Interchangeability. H, B, GJ, J, K nuts have the same threads and are interchangeable Except where noted. Grip Joint Series Copper tube, CTS PE is stabbed through the nut and grip ring/friction ring and gasket assembly to stab depth. The GJ nut is tightened to the stop/shoulder on the body, which compresses the EPDM gasket and phosphorus bronze gripper, which creates a water-tight seal and pull-out strength. Phosphorus Bronze Grip RIng EPDM Rubber Gasket Copper Tube or CTS PE Brass Nut Engineering
